Use APKPure App
Get Easy DIY Wooden Bench old version APK for Android
This App Has A Lot Of Easy DIY Wooden Bench That Can Inspire You
This outdoor bench project is a great way to show off your woodworking skills. The bench is a perfect addition to a garden, deck or around a fire pit.
Tools
power sander
Kreg pocket hole jig
circular saw
table saw
90-degree-angle clamp
drill
jigsaw
hammer
pocket hole bit
clamps
Materials
4d finishing nails
wood glue
Introduction
This project uses cedar, but redwood would work just as well. If you decide to use treated lumber, only make the base assemblies from it and use cedar or redwood for the seat slats. When buying lumber, look for pieces that are straight and have the fewest knots, especially knots that are on the edge of the board. Note that dimensional cedar (2x4s for example) may be more difficult to find at your local home improvement center or hardware store, so you may need to visit a lumber yard.
-
Step 1
Project Cut List
End Legs – four at 1-1/2" x 3-1/2" x 16-1/2"
Legs – eight at 1-1/2" x 3-1/2" x 16-1/2"
Long Front Aprons – two at 1-1/2" x 3-1/2" x 25-1/2"
Short Front Apron –one at 1-1/2" x 3-1/2" x 18-1/8"
Long Back Aprons – two at 1-1/2" x 3-1/2" x 25-1/2"
Short Back Apron – one at 1-1/2" x 3-1/2" x 18-1/8"
End Aprons – six at 3/4" x 3-1/2" x 11"
Seat Braces – three at 1-1/2" x 1-1/2" x 13-1/2"
Outer Seat Slat 1– two at 1-1/2" x 3-1/2" x 31-1/2"
Inner Seat Slat 1 – two at 1-1/2" x 3-1/2" x 24"
Step 2
Cut the Legs
Cut the outer legs. Two will be used on each outer end of the bench (the base assembly). Follow the layout in Image 1.
Then cut the inner legs, refer to the dimensions in the cut list.
Step 3
Cut the Apron Pieces
The aprons are rails used to connect the legs and support the seat. Use the layouts and to create the long and short front aprons. Refer to the cut list above for the exact sizes of the aprons.
To cut the radii on the inside corners of the front aprons, use a half-dollar coin or something of similar size .
For marking the top arc, use a thin strip of wood or a flexible metal ruler. Drive in nails or brads to hold the wood strip or ruler in place while marking. Use a jigsaw to cut the front apron pieces to shape.
Step 4
Attach the Apron Pieces to the Legs
Position an end apron flush against two legs (Image 1) and attach using glue and 2-1/2" pocket-hole screws. Build two assemblies.
Place a scrap piece of 1-by material (3/4-inch thick) underneath the short front apron and positioned flush against two end apron assemblies and attach using glue and 2-1/2" pocket-hole screws.
Position the short back apron flush against the end apron assemblies and attach using glue and 2-1/2" pocket-hole screws.
Want to know more ?
Download this application now and get what you want here. worth to try and you will like it.
simply share through any social media platforms. thank you for downloading. please enjoy and give us any feedback.
Last updated on Nov 29, 2017
Minor bug fixes and improvements. Install or update to the newest version to check it out!
È necessario Android
4.0 and up
Categoria
Segnala
Easy DIY Wooden Bench
7.1 by Wayang Apps
Nov 29, 2017